Tuesday 25 September 2012

Needle Scalar - Jet Chisel



Never skip a blow, cleans and descales all jobs fast. Gets into extremely restricted areas.

An asset in any industry de-slagging, de-sputtering welds, cleaning, castings, brick, stonework, and other materials. Jet Chisel is a prime pneumatic perfomer in each of these and other tough job areas.

Maximum performance in a light-weight, minimum size air tool, Jet Chisel delivers years of trouble-free, efficient operation. And it's a tool that gets all the way down to the surface of matters. Quick, Jet Chisel needles adjust to any surface contour automatically. They get deep into corners, all the way into uneven surfaces, all types of curvatures making it a tool no shop should be without. It's an equally efficient time-saver in ship-board applications, too.

Specifications


Model
AJC-16
JT-20
JEX-20
Rated Air Pressure MPa (kgf/cm2)
0.59 (6)
0.59 (6)
0.59 (6)
Air Consumption(No load) m3/min
0.07
0.2
0.2
Stroke Speed min-1
6000
4000
4000
Needles to be used mm
OD 3 x 180 (3pcs.)
OD 2 x 180 (29pcs.) or OD 3 x 180 (12pcs.)
OD 2 x 180 (29pcs.) or OD 3 x180 (12pcs.)
Hose Size inch
40610
40610
40610
Mass (Weight) kg
0.98
2.4
2.4
Standard Accessories
  • Needle OD 3mm x 180 mm : 3 pcs. (Needle OD 3mm x 180 mm:3 pcs. on the body)
  • Bushing PT3/8 x NPT3/8 : 1 pc.
  • Hose Nipple PT3/8 x 3/8 : 1 pc.
  • Needle OD 3mm x 180 mm : 12 pcs. (Needle OD 3mm x 180 mm : 12 pcs. on the body)
  • Bushing PT3/8 x NPT3/8 : 1 pc.
  • Hose Nipple PT3/8 x 3/8 : 1 pc.
  • Needle OD 3mm x 180 mm : 24 pcs. (12 pcs.) (Needle OD 3mm x 180 mm : 12 pcs. on the body)
  • Bushing PT3/8 x NPT3/8 : 1 pc.
  • Hose Nipple PT3/8 x 3/8 : 1 pc.

Specifications

Model
JC-16
JEX-24
JEX-28
JEX-2800
Rated Air Pressure MPa (kgf/cm2)
0.59 (6)
0.59 (6)
0.59 (6)
0.63 (6.4)
Air Consumption (No load) m3/min
0.15
0.27
0.35
0.43
Stroke Speed min-1
4000
4000
4500
3700
Needles to be used mm
OD 2 x 150 (29pcs.)
OD 2 x 180 (53pcs.) or OD 3 x180 (23pcs.)
OD 2 x180 (66pcs.) or OD 3 x180 (28pcs.) or OD 4 x180 (14pcs.)
Hose Size inch
40610
40610
40610
40610
Mass (Weight) kg
1.4
2.7
3.5
3.1
Standard Accessories
  • Needle OD 2mm x 150 mm : 29 pcs. (Needle OD 2mm x 150 mm : 29 pcs. on the body)
  • Bushing PT3/8 x NPT3/8 : 1 pc.
  • Hose Nipple PT3/8 x 3/8 : 1 pc.
  • Needle OD 3mm x 180 mm : 23 pcs. on the body
  • Hex. Socket Screw Key 6 mm: 1 pc.
  • Bushing PT3/8 x NPT3/8 : 1 pc.
  • Hose Nipple PT3/8 x 3/8 : 1 pc.
  • Needle OD 4mm x 180 mm : 14 pcs. (Needle OD 3mm x 180 mm : 28 pcs. on the body)
  • Needle Supporter OD 4mm : 1pc.
  • Bushing : 1 pc.
  • Hose Nipple : 1 pc.
  • Needle OD 4mm x 180 mm : 14 pcs. (Needle OD 3mm x 180 mm : 28 pcs. on the body)
  • Needle Supporter OD 4mm : 1pc.
  • Bushing : 1 pc.
  • Hose Nipple : 1 pc.

Orbital Sander


Sand and polish metal, wood, plastic to a super fine swirl-free finish. Light weight, compact, powerful, whisper quiet, and
adjustable speed regulator. Productivity and efficiency increase with the orbital sander. The lightweight unit delivers the performance of heavy duty unit with less vibration and reduced operator fatigue.

Random orbital action creates a professional finish
The special construction includes the mounting of counter shaft below the rotor. This works in combination with the spindle and circular motions for an extra-fine finish. Speed adjustments allow selection for the best speed for the best job. Random orbital action eliminates swirl patterns and is suitable for polishing, too.

Specifications


Model
OSV-60A
Rated Air Pressure MPa (kgf/cm2)
0.59 (6)
Air Consumption (No load) m3/min
0.68
Motor Free Speed min-1 (rpm)
8,500
Orbit Diameter mm
OD 10
Paper Size mm
OD 150
Mass (Weight) kg
2.0
Pad
for self stick papers

Optional Accessories

Part No.
Part Name
Q'ty
TA99582
Abrasive Paper #40
100 pcs.
TA99583
Abrasive Paper #60
100 pcs.
TA99584
Abrasive Paper #80
100 pcs.
TA99585
Abrasive Paper #100
100 pcs.
TA99586
Abrasive Paper #120
100 pcs.
TA99587
Abrasive Paper #180
100 pcs.
TA99588
Abrasive Paper #240
100 pcs.
TA99589
Abrasive Paper #280
100 pcs.
TA99590
Abrasive Paper #320
100 pcs.
TA99591
Abrasive Paper #400
100 pcs.

Standard Accessories
  • Bushing PT1/4 x NPT1/4 : 1 pc.
  • Spanner 17 : 1 pc.
  • Brush : 1 pc.
  • Abrasive Paper #40 : 1 pc.
  • Abrasive Paper #60 : 1 pc.
  • Abrasive Paper #80 : 1 pc.
  • Abrasive Paper #120 : 1 pc.
  • Dust Hose : 1 pc.
  • Dust Bag : 1 pc.
  • Brush : 1 pc.
  • Hose Nipple : 1 pc.

Pneumatic Grinder

NITTO KOHKI make Pneumatic Grinder for Scaling and Grinding job



Technical Specification 
Model
MLG-70 Lever Type
MLG-70 Ring Type
MAG-70
Rated Air Pressure Mpa (kgf/cm02)
0.6 (6)
0.6 (6)
Air Consumption (No load) m3/min
0.75 (No load ) 1.1 (Load)
0.69 (No Load) 1.15 (load)
Free Speed min-1 (rpm)
7600
7100
Depressed Center Grinding Wheel mm
180
180
Hose Size
3/8
1/2
Mass (Weight) kg
2.45
2.25
3.4
Standard Accessories
  • 6 mm Hex. Socket Screw Key: 1 pc.
  • 10 mm Hex. Socket Screw Key: 1 pc.
  • Bushing R 3/8 x NPT 3/8: 1 pc.
  • Handle Ass'y: 1 set.
  • Wheel Guard Ass'y" 1 set

Pnematic Belt Sander - BELTON

Suitable for sanding jobs in narrow spaces, recessed corners or on curved surfaces







Technical Specification 
Model
B-10N
B-20N
B-20NB
B-30N
Rated Air Pressure Mpa (kgf/cm2)
0.6 (6)
0.6 (6)
0.6 (6)
0.6 (6)
Air consumption (No load) m3/min
0.4
0.52
0.52
0.68
Motor Free Speed min-1 (rpm)
17000
17000
17000
14000
Belt Speed m/min
1120
2620
2620
2160
Belt Size mm
10x330
20x520
20x520
30x540
Hose Size inch
1/4
1/4
1/4
1/4
Mass (Weight)
0.7
1.2
1.2
2.4



 

Portable Manual Feed Drill Machine WOJ-3200

WOJ-3200

HOLE DIAMETER: 17.5-32mm
PLATE THICKNESS: 9-50mm

The World's first manual feed with 'Smart-Stop/Rapid-Restart' Technology

Fail-Safe Restart

Designed to use Jetbroach Carbide Tipped Annular Cutters

Reversible Feed HandlesFeed handles can be positioned on the right or left hand side for ease of drilling and mounting in confined spaces.

Body height AdjustmentLoosening allows the complete frame to be lifted up to a maximum of 60mm for specific drilling. The use of Hi-Broach cutters require the frame to be at the lowest position, while twist bit drilling required the appropriate amount of elevation to be adjusted for safe operation. The pillar clamp is required to be tightened before safe drilling may take place.

Note: Always engage the magnet before adjusting the body height.

Optional Chip BreakerOptional chip breaker helps prevent the cutter from plugging the hole with chip debris, causing some false overloads and cutter life loss.

Optional One Touch AdapterOptional one-touch adapter allows the use of up to 13 mm twist drills to be used in the original arbor.

Optional Jet oiling SysteOptional jet oiling for use with all drilling applications and types of cutters to extend cutter life and increase hole output.

Specifications
Model
WOJ-3200
Power Source (Single Phase)
220-240V AC, 50/60 Hz
Electric Drill
Rated Power Consumption W
950
Rated Current A
4.3
No Load Speed min-1 (rpm)
870
Magnet Power Consumption W
70
Hole-Cutting Capacity Cutter
Hole-Diameter
Plate Thickness
One Touch Type JETBROACH
17.5 to 32
9 to 50mm
Magnet Holding N (Kgf)
9,000 (918)
Magnet Dimensions mm
99 x 177
Mass (Weight) kg
13

Standard Accessories
  • Guard Ass'y: 1 set
  • Pilot Pin 08050: 1pc.
  • 3 mm Hex Socket Screw Key: 1 pc.
  • 6 mm Hex Socket Screw Key: 1 pc.
  • 8 x 10 mm Spanner: 1 pc.
  • Safety Strap: 1 pc.
  • Sub handle: 1 pc.

Portable Magnetic Based Drilling Machine - WA 5000




ATRA-ACE WA5000 can drill upto 50mm diameter in a 75mm thick plate.

Features

Slow Start MechanismThe feed speed is reduced for the first few seconds after boring begins to ensure a smooth cut through the mill scale.

Auto-feedAutomatic control & feed are activated by simply pushing the rod handle to engage the gears.

Load SensorThe dual sensing system responds to both drilling and feeding forces on the cutter for the optimum cutting condition.

Variable SpeedThe feed speed is continuously monitored and updated proportionally to the load on the cutter.

Cycle StopAfter the cut has finished, a detector responds to the reduction in load and both the drill and the feed motor automatically stop.

Overload StopWhen an excessive load is applied to the cutter, both the drill and the feed motor will stop automatically to prevent the cutter from breaking.


Specifications
Model
WA-5000
Power Source (Single Phase)
110-120 V AC, 50/60Hz
220-240 V AC,50/60 Hz
Electric Drill
Rated Power Consumption W
1,150
Rated Current A
10.8
5.4
No Load Speed min-1 (rpm)
350/650
Magnet Power Consumption W
75
Hole-Cutting Capacity Cutter
Hole Diameter
Plate Thickness
One Touch Type JETBROACH 35L
17.5 to 40 mm
9 to 35mm
One Touch Type JETBROACH 50L
17.5 to 50mm
9 to 50mm
One Touch Type JETBROACH 75L
17.5 to 50mm
9 to 75mm
One Touch Type JETBROACH 25L
14 to 50mm
9 to 25mm
One Touch Type JETBROACH 50L
14 to 50mm
9 to 50mm
Magnet Holding N (Kgf)
9,800 (1,000)
Magnet Dimensions mm
101 x 201
Mass (Weight) kg
23

Standard Accessories

  • Pilot Pin 08050 A3: 1 pc.
  • Chain Ass'y: 1 set
  • Side Handle Ass'y: 1 set
  • 3 mm/4mm Hex Socket Screw Key: Each 1 pc.
  • 8 x 10 mm Spanner: 1pc.
  • Cutting Oil 0.5 l: 1 can
  • Plastic Case: 1 pc.
  • Guard Ass'y: 1set